Posted by Kerry on 02/27/10 - 21:02:11
IP: 68.108.12.69 Browser: Mozilla/5.0 (Windows; U; Windows NT 5.1; en-US; rv:1.9.1.8) Gecko/20100202 Firefox/3.5.8 (.NET CLR 3.5.30729)

Message Body

I removed my landing gear and the metal sheet above the gear that supports it is a bit bowed.  Plane only has 8hrs on it.  I don't know if this is a common problem with the design or if it was fabricated with to thin of metal  to support the gear.  Does anyone have some plans of the landing gear attachment point I could look at and see what the specs call for.  Any info would help.

For Further Reading

landing gear - Kerry, 03/02/10 - 15:01:36 landing gear - J.W. French, 03/16/10 - 00:45:49 typical actually - Cary Winch, 03/03/10 - 10:21:51 landing gear - John Warren, 02/28/10 - 10:55:28 landing gear - Kerry, 02/28/10 - 15:24:05 landing gear - John Warren, 02/28/10 - 10:27:34

Reply to this Message

Back to the Forum

RobBoard v1.0 © 1999 by Robert Eisler.