Posted by Rick Golightly on 05/07/10 - 00:00:15
IP: 74.186.214.68 Browser: Mozilla/4.0 (compatible; MSIE 8.0; Windows NT 5.1; Trident/4.0; Mozilla/4.0 (compatible; MSIE 6.0; Windows NT 5.1; SV1) ; .NET CLR 1.1.4322; .NET CLR 2.0.50727; .NET CLR 3.0.4506.2152; .NET CLR 3.5.30729)

Message Body

My BD experienced he Gear truss box failure of the early models before modification. What is the recommended fix or fixes? I think Ce 150 gear was used on the one i bought instead of 140/170. I need to find 170 gear as well. Anyone have some available?

For Further Reading

Gear - Mike, 05/07/10 - 09:31:01 Mike's Gear - Rick G, 05/08/10 - 21:42:54 gear truss box reinforcement - Rick G, 05/07/10 - 19:39:06 gear truss reinforcement - Kerry, 05/08/10 - 02:00:02 photo fix - Rick G, 05/08/10 - 07:32:51 email pix - Kerry, 05/08/10 - 19:27:21 email - Rick G, 05/08/10 - 21:24:36 140/170 gear legs - Austin, 05/07/10 - 23:11:20 gear legs - Austin, 05/07/10 - 09:58:18 gear - Rick G, 05/07/10 - 19:33:37 Gear Box Reinforcement - Sam White, 05/08/10 - 07:31:12 landing gear - Rick Golightly, 05/17/10 - 21:04:02 Extenders - Austin, 05/17/10 - 22:51:29 extenders - Rick G, 05/17/10 - 23:51:47 Loads on leg attach points - Austin, 05/19/10 - 17:36:00 extenders - Rick G, 05/17/10 - 23:32:09

Reply to this Message

Back to the Forum

RobBoard v1.0 © 1999 by Robert Eisler.